|
Product Details:
|
| Material: | Ss304, Ss316L, Other | Vane Plate Thickness: | 1mm |
|---|---|---|---|
| Vane Distance: | 20mm, 25mm, 30mm, Or Other | Chevron Height: | As Per Order |
| Shape: | As Per Order | Bracket Plate Thickness: | As Per Order |
| High Light: | SS316L mist eliminator,mist eliminator SS316L,Corrugated Plate mist eliminator |
||
SS316L vane plate droplet separator 1 mm thickness corrugated plate
1. Custom manufacturing service of vane plate droplet separator.
In Hualai factory, we are always trying to understand our customer's requirements and so better satisfiy them. In this case, it is a new-designed chevron plate mist eliminator in stainless steel 316L material. The point is on big number of gas passages. It assures a high mist eliminating efficiency in operation.
2. Vane plate droplet separator data
| No. | Item | Unit | Data |
| 1 | Absorber (case) | ||
| 1.1 | Diameter of front passage of demister | m | Φ2.6 |
| 1.2 | Raw flue gas flow of single tower (wet) | m3/h | 31000 |
| 1.3 | Net flue gas flow of single tower (wet) | Nm3/h | 32500 |
| 1.4 | Net flue gas temperature | ℃ | 45 |
| 1.5 | Average velocity of flue gas before demister | m/s | ≤2 |
| 1.6 | Spray mode of absorption tower | downward | downward |
| 1.7 | Absorber nozzle type | Hollow cone | |
| 1.8 | Average droplet size(D32) | μm | 2000 |
| 1.9 | Flue gas temperature: normal operation / design | ℃ | 45/80 |
| 1.10 | Cl-concentration | ppm | ＜40000 |
| 2 | Demister data | ||
| 2.1 | First stage vane plate demister | ||
| 2.1.1 | Type | ||
| 2.1.2 | Material | ||
| 2.1.3 | Weight | kg | |
| 2.2 | Second stage vane plate demister | ||
| 2.2.1 | Type | ||
| 2.2.2 | Material | ||
| 2.2.3 | Weight | kg | |
| 2.3 | Liquid holding capacity of flue gas at demister outlet (dry, standard state) | mg/Nm3 | |
| 2.4 | Pressure drop (two stage plate) | Pa | <150 |
| 2.5 | Material of demister | ||
| 2.6 | Spray pipe material | ||
| 2.7 | Total weight of spray pipe | kg | |
| 2.8 | Nozzle material | ||
| 2.9 | Nozzle pressure drop | bar | |
| 2.10 | Number of nozzles | pc | |
| 2.11 | Nozzle unit weight | kg | |
| 3 | Flushing water volume | Fill in by 100% | |
| 3.1 | Upper part of the first stage | m3/(h·m2) | |
| 3.2 | Lower part of the first stage | m3/(h·m2) | |
| 3.3 | Upper part of the second stage | m3/(h·m2) | |
| 3.4 | Lower part of the second stage | m3/(h·m2) |
3. Custom shape embeded stainless steel vane plate droplet separator advantages
| Advantage 1 | Lower pressure drop. |
| Advantage 2 | Resistance to fouling. |
| Advantage 3 | High tensile strength. |
| Advantage 4 | Durable and long service life. |
| Advantage 5 | Custom-made design available. |
| Advantage 6 | High filtering and separating efficiency. |
| Advantage 7 | High capacity. It has 30% to 100% more capacity than the wire mesh mist eliminator. |
4. Usage of vane plate droplet separator
The chevron plate demister is widely used to separate entrained liquid droplets from gas stream, in which the liquid droplets are 8 μm or larger. When the gas stream passes through the vane pack demister and change direction, the liquid droplets are unable to change direction as quick as the gas due to their momentum. So the liquid droplets impact on the chevron blade and then coalesce and form large droplets until drain away.
In the special environment, where there is some small solid particles, vane pack mist eliminator is the better choice for liquid and gas separator than the wire mesh demister.
5. Custom SS vane plate droplet separator.
Welcome your inquiry anytime! Don't hesitate to contact us with any questions!
Tel: 15112670997
