Product Details:
|
Grids: | Laser Cut And Welded Frame | Vane Type: | S Type |
---|---|---|---|
Shape: | Rectangular, Round Or As Per Order | Material: | SS304, SS316L, Etc. |
Pitch Of Vane: | 20mm, 25mm, 30mm, Etc. | Construction: | Welding |
High Light: | Chevron Mesh Pad Mist Eliminator,SS304 Mesh Pad Mist Eliminator,Laser Cut Ribs Mist Eliminator |
SS304 laser cut ribs custom S Type Chevron Mist Eliminator
1. SS304 S type chevron mist eliminator datasheet:
Vane plate construction | laser cut and welded ribs |
Pitch of vane | 20mm, 25mm, 30mm, etc. |
Vane plate height | about 220mm |
Demister height | about 245mm |
Shape & size | as per order |
Chevron plate type | S type stainless steel corrugated plate |
Material | SS304, 316L, etc. |
2. Hualai's experiences on chevron mist eliminators,
The design, installation and operation of the demister shall ensure high availability and good demisting effect. It must also have very high removal efficiency for very small water droplets.
The mist eliminator system shall be composed of two-stage plate type mist eliminator, and special attention shall be paid to the influence of the change of fly dust concentration at the inlet of FGD device. A flushing system to remove sediment shall also be included in the demister system. When the demister is running, it can automatically flush according to the corresponding reasonable flushing procedure.
The plate of mist eliminator shall have strong rigidity and be able to bear the high-speed water flow, especially the high-speed water flow during manual flushing
The mist eliminator shall be installed as small parts. Every part shall not exceed the weight of two person handling and maintenance and the components shall be able to pass through the manhole door of the demister section of the absorber.
3. SS304 S type chevron plate mist eliminator advantages:
1.Lower pressure drop.
2.Resistance to fouling.
3.High tensile strength.
4.Durable and long service life.
5.Custom-made design available.
6.High filtering and separating efficiency.
7.High capacity. It has 30% to 100% more capacity than the wire mesh mist eliminator.
4. SS304 S type chevron plate mist eliminator to be used instead of mesh pad mist eliminator
Larger droplets;
Surge Buffeting;
Foam Problems
Severe Corrosion;
High Liquid Load;
High Gas Velocity;
Low Pressure Drop;
Clogging Particulates;
Accumulated Residues;
Extremely Viscous Liquid.
5. SS304 S type chevron mist eliminator working way
when the gas containing mist flows through the demister at a certain speed, because of the inertial impact of the gas, the mist and wave plate collide and are attached to the wave plate surface. The multi fold structure of the wave plate of the mist eliminator increases the chance of catching and gathering the mist, and the undeleted mist will catch and gather at the next turn through the same function, so it will work repeatedly, thus greatly improving the efficiency of mist eliminator. After the gas passes through the chevron mist eliminator, there is basically no mist.
6. SS304 / 316L chevron mist eliminator new ideas.
Welcome your inquiry anytime! We are ready to provide any possible help we can!
For this vane pack mist eliminator product, our customers come from Singapore, Thailand, Canada, Australia, Indonesia, UAE, Italy, UK, etc.
Tel: 15112670997