|Vane Type:||S Type With Hook||Material:||PP (polypropylene)|
|Pitch Of Vane:||20mm, 25mm, 30mm, Etc.||Sections:||According To Manway|
|Grids:||Slot Frame And Through Rod||Shape:||Round, Square, Rectangular|
Rectangular Vane Pack Mist Eliminator,
235mm Vane Pack Mist Eliminator,
Vane Pack Mist Eliminator pp
Custom shape & size S type with hook PP vane pack mist eliminator
1. S type with hook pp vane pack mist eliminator basic data:
|Type||S type vane plate mist eliminator|
|Hook number||3 pcs|
|Pitch of vane||20mm, 25mm, 30mm, etc.|
|Construction method||Joint rod or extra frame|
2. S type with hook pp vane pack mist eliminator applications
Vane pack mist eliminator is widely used in various applications to separate liquid droplets from gas streams, in all applications where a contact between liquid and flowing gas, the vane pack demister can supply a good performance. Additionally, tiny mist droplets can be carried away with the gas.
It is widely used in the foaming system and high liquid viscosity system in refineries, chemicals, petrochemicals, pharmaceuticals, dyes and intermediates, aromatics and other process industries.
3. PP vane pack mist eliminator general impression
The vane pack mist eliminator consists of a set of chevron corrugated plates with well defined geometry. It is very popular and useful internals for gas liquid separation applications. These plates according to design and shape can remove the droplets more than 15 microns.
Hualai factory has been producing a range of vane pack mist eliminators for critical applications in industrial use. Standard Material of vane type mist eliminator is polypropylene & stainless steel.
4. PP vane pack mist eliminator with hooks provide higher efficiency
An option of different vane plate for higher efficiency requirement:
Also in this photo we can see another construction method of using only through rods. The the layer height is same with the vane plate height, which is about 230mm.
Removal of very small droplets can be achieved using a two stage mist eliminator by fitting a mesh pad to the upstream face of the unit to coalesce droplets as small as 4 to 5 microns into droplets in the size range which are easily removed by the vane separator.
Welcome your inquiry anytime! We are ready to provide any possible help we can!
Contact Person: Seven Zhao