|
Product Details:
|
| Material: | SS304, SS316L | Surface Treatment: | Perforation, Corrugation |
|---|---|---|---|
| Height: | 100mm | OEM: | Available |
| Surface Area: | 250m2/m3, 350m2/m3, 500 M2/m3 | Size: | Specified By Client |
| High Light: | wire mesh packing,stainless steel packing |
||
Corrugation clination 30 degrees metal sheet structured packing
Materials of Construction
The most common material used for Hualai structured column packing is SS 304L and SS 316L. However Hualai manufactures this solely based on our customers’ requirements and can also be made from other materials based on special requests.
Uniform Liquid Distribution
In order to achieve even liquid distribution over the packing it is a must to have a good liquid distributor to maximize the interaction of the liquid and vapor. However if the packing height exceeds 3 meters we recommend using an intermediate liquid re-distributor as well for even flow.
Fixing and Installation
It is a very basic and simple procedure. Once we have optimized the dimensions of the packing we must ensure that the inside of the column is clean and has no weld joints or bulges to obstruct the installation. The supporting structure can be made of two cross bars at 90 degrees to each other and in larger columns the same construction must be repeated at a pitch of 150mm.
Once the support is in place, successive modules of Hualai structured packing must be inserted from the top – down. Normally a wooden disc (having a slightly small diameter than the packing) is mounted on a pole and used to push each segment down to their position due to the very narrow diameter of the column.
Surface Treatments of Sheet Metal Structured Packing
It is important to achieve good contact between the liquid and vapor phases. A packing that spreads the liquid evenly in a thin film will exhibit beter performance. Mixing the film creates turbulence that enhances the mass transfer.
Modifications to the texturing of the packing surface improve the liquid spreading which, in turn, leads to enhanced packing efficiency.
All types of Hualai structured packings are available in a variety of corrugation sizes. This provides the versatility needed to optimize a packing configuration to best meet the efficiency, capacity, and pressure drop requirements for a particular application.
Compare: Packed columns offer multiple benefits
| Packed columns | Trayed columns |
| Lower pressure drop leads to significant power savings. (Greater than 5% reduction in power is possible.) | Higher pressure drop, but shorter columns. |
| High turndown capability. (Down to 40% of design capacity is possible.) | Limited turndown for efficient operation. (60-70% of design capacity is typical.) |
| Enables pure argon production by distillation, therefore eliminating need for a pure hydrogen source. | Can be used for high-pressure distillation. |
Hualai metal sheet structured packing ready for shipping
Welcome your inquiry about Hualai structured packing any time!
Contact Person: AnnLi
Tel: +8613333087316
