|Material:||SS304, SS316L||Height:||Appr. 210mm|
|Surface Area:||452 M2/m3, 252 M2/ M3||Size:||Specified By Client|
|Surface Treatment:||Perforation, Corrugation||OEM:||Available|
wire mesh packing,
stainless steel packing
452Y Metal Structured Packing Appr. 210mm Layer Height High Capacity
Hualali HC structured packing is similar in construction to standard packing, except for a subtle modification in the geometry of the corrugation at the top and bottom of each packing layer. This relatively small change in geometry eliminates the abrupt change in flow direction of the liquid and vapor phases at the packing layer interface.
Conventional structured packing capacity is limited by flow interaction at the layer interface where the abrupt directional change limits the amount of counter-flowing liquid and vapor. As the liquid flow becomes restricted by the upward-flowing vapor, the liquid begins to build up at the layer interface which increases the pressure drop and may ultimately lead to flooding.
The geometry of Hualai HC structured packing relieves the liquid flow restriction. Because the premature build-up of liquid is eliminated, the low pressure drop characteristics of structured packing are better maintained throughout the eﬃcient operating range of the packing. The benefits of Hualai HC structured packing are more significant for smaller corrugation crimp size, higher surface area packings. Depending on application and packing style, up to a 40% increase in capacity has been observed.
Materials of Construction
The most common material used for Hualai structured column packing is SS 304L and SS 316L. However Hualai manufactures this solely based on our customers’ requirements and can also be made from other materials based on special requests.
Uniform Liquid Distribution
In order to achieve even liquid distribution over the packing it is a must to have a good liquid distributor to maximize the interaction of the liquid and vapor. However if the packing height exceeds 3 meters we recommend using an intermediate liquid re-distributor as well for even flow.
Compare: Packed columns offer multiple benefits
|Packed columns||Trayed columns|
|Lower pressure drop leads to significant power savings. (Greater than 5% reduction in power is possible.)||Higher pressure drop, but shorter columns.|
|High turndown capability. (Down to 40% of design capacity is possible.)||Limited turndown for efficient operation. (60-70% of design capacity is typical.)|
|Enables pure argon production by distillation, therefore eliminating need for a pure hydrogen source.||Can be used for high-pressure distillation.|
Surface Treatments of Sheet Metal Structured Packing
It is important to achieve good contact between the liquid and vapor phases. A packing that spreads the liquid evenly in a thin film will exhibit beter performance. Mixing the film creates turbulence that enhances the mass transfer.
Modifications to the texturing of the packing surface improve the liquid spreading which, in turn, leads to enhanced packing eﬃciency.
All types of Hualai structured packings are available in a variety of corrugation sizes. This provides the versatility needed to optimize a packing configuration to best meet the eﬃciency, capacity, and pressure drop requirements for a particular application.
Hualai high capacity metal structured packing ready for shipping
Welcome your inquiry about Hualai structured packing any time!
Contact Person: Amelia Li