Corrosion Resistance Monel 400 Wire Mesh For Particle Separator Pad

Monel 400 Wire Mesh Corrosion Resistance for Particle Separator Pad

1. Monel 400 Wire Mesh Corrosion Resistance Demister Data:

Hualai demister mesh in MONEL material in 02 pieces of 0.6 m x 0.3m x 0.20 m high each.

2. Monel 400 Wire Mesh Corrosion Resistance Demister Structure,

The mesh pad demister is mainly constructed by wire mesh and grids (options). The pad consists multiple layers of fabric-knitted from metals and synthetic fiber monofilament chosen to suit the particular duty requirements. After knitting each layer is crimped and then converted into desired size or shape or pads. The pads are not entirely rigid and generally supported by open grid structure. The grids usually adopt stainless steel 25mm*3mm flat bars and Φ6mm round rods. Sometimes 25*10mm PP grids and special PTFE grids are also used.

3. Monel 400 Wire Mesh Corrosion Resistance Demister Features,

Monel 400 alloy is a multi-purpose material, which can be applied in many industrial fields: 1. Seamless water pipe and steam pipe in power plant 2. Sea water exchanger and evaporator 3. Sulfuric acid and hydrochloric acid environment 4. Crude oil distillation 5. Pump shaft and spiral pulp of equipment for deep sea water 6. Equipment for uranium extraction and isotope separation in nuclear industry 7. Pumps and valves for manufacturing hydrochloric acid equipment

Characteristics of Monel products: Monel 400 is a corrosion-resistant alloy with large amount, wide application and excellent comprehensive performance. The alloy has excellent corrosion resistance in hydrofluoric acid and fluorine gas medium, as well as in hot concentrated alkali solution. At the same time, it is also resistant to the corrosion of neutral solution, water, seawater, atmosphere, organic compounds, etc. An important feature of the alloy is that it generally does not produce stress corrosion cracks and has good cutting performance. The structure of MONEX 400 alloy is single phase solid solution with high strength.

4. Monel 400 Wire Mesh Demister Corrosion Resistance,

Corrosion resistance: Monel 400 alloy has excellent corrosion resistance in fluorine, hydrochloric acid, sulfuric acid, hydrofluoric acid and their derivatives. At the same time, it has better corrosion resistance than copper base alloy in seawater. Acid medium: Monel 400 is corrosion resistant in sulfuric acid with concentration less than 85%. Monel 400 is one of the few important materials that can resist hydrofluoric acid. Water corrosion: in most cases of water corrosion, Monel 400 alloy not only has excellent corrosion resistance, but also has few pitting corrosion and stress corrosion. The corrosion rate is less than 0.025mm/a. High temperature corrosion: the maximum temperature of Monel 400 in continuous operation is about 600 ℃, and the corrosion rate is less than 0.026mm/a in high temperature steam. Ammonia: due to the high nickel content of Monel 400 alloy, it can resist the corrosion of anhydrous ammonia below 585 ℃ and ammoniation.

Hualai team is ready to provide professional service! Welcome your contact!