|Material:||Carbon Steel, Stainless Steel||Application:||Tower Liquid Feed Distributor|
|Structure:||Joint Sections||Advantage:||Low Pressure Drop|
|Type:||Troughs||Kep Point:||Liquid Load To Be Distributed|
mesh mist eliminator,
wire mesh pad
Trough - type liquid distributor tower internal design and manufacturing
We apply the following principles for liquid distribution:
When assessing liquid distribution design, we must consider several key principles. They depends on the following requirements:
The number of drip points generally ranges between 60-150/m2, depending on the particular application.
Main reference dimensions of spray distributor
|Tower inner diameter/mm||Main tube diameter / mm||Sub tub No. Of each side||Sprayer No.||
Liquid distributor position and simple drawing:
Materials of construction
Tower internals can be made of types of materials. Usually it is carbon steel or stainless steel. However exotic metals such as Hastelloy alloys, titanium and other steel types are sometimes required.
There is a brief list of possible materials below.
Carbon Steel / 410 Stainless Steel / 304 Stainless Steel / 316L Stainless Steel / 321 Stainless Steel
Monel / Inconel / Nickel / Titanium / Duplex 2205 / Hastelloy alloys
Please specify if you need other materials not listed here.
When we decide what type of internals are best suitable for a given tower, like for distillation, fractionation or other mass transfer process, we must consider many factors. The desired capacity, efficiency, turndown, pressure drop, corrosion, fouling and previous plant experience are all of importance.
Hualai has successfully served the process industries such as oil refineries, chemical plants, etc. Let us apply this experience to your project to assure a successful result and continued success of your plant.
Welcome your contact with your private tower internals plan or ideas!
Contact Person: AnnLi