|Grids:||Flat Bar||Filter Rate:||To Be Tested|
vapour liquid separator,
demister mist elimiantor
500mm gas liquid separator for test with plain mesh and crimped mesh
Gas velocity of gas liquid separator:
Max gas velocity:uf=K[(ρL-ρG)/ρG]1/2 m/s
ρL——density of liquid drop Kg/m3
ρG——density of gas before demister Kg/m3
K——Gas-liquid separate mesh constant
Recommended operation gas velocity:ug=0.50uf---0.80uf m/s
How does a liquid gas separator / demister work?
(1)A vapor stream carrying entrained liquid droplets passes through a demister pad. The vapor moves freely through the knitted mesh.
(2)The inertia of the droplets causes them to contact the wire surfaces and coalesce.
(3)The large, coalesced droplets formed in the mesh ultimately drain and drop to the vessel bottom.
Some necessary data of gas liquid separator if Calculation Suggestions and Service are needed
|Please State your demister / mist eliminator application|
|Gas||Max. gas volume flow (operating conditions)||M3/h|
|Gas density (operating condistions)||Kg/m3|
|Operating pressure||Bar (a)|
|Dynamic viscosity of the liquid||mPas|
|Column diameter or dimensions||mm|
|Opening for installation||Manhole||¨ DN|
|Vessel flange||¨ Size|
|type of mist eliminator||Wire mesh demister|
|Efficiency of separation||%|
|Max. pressure drop|
Please pay attention to the Unit when refering to this sheet.
Wire mesh gas liquid separator, which are used in removing droplets entrained in flow gas, is constructed from knitted wire mesh with a cellular structure. The knit mesh are made into a mesh pad with determinate thickness and diameter, through which the two phases liquid-gas or liquid-vapor are disengaged.
From the statistic data obtained both in laboratory tests and industrial applications, it shows that the proper designed mesh pad demister allows a separation of liquids carried by gas with efficiency reaching 99.9%.
The material we have in stock.
PP, PTFE, SS304, SS304L, SS316, SS316L, SS201, SS202, SS310S, SS321, Copper, Nickel, Titanium, Duplex 2205, Duplex 2507, NS-80, Monel 400 alloy, Co-knit 904L+fiber glass, Co-knit 316L+ fiber glass, Co-knit 316L+PP flat...
Also we can handle other materials, but please specify when ordering.
Hualai’s Advantages in mesh pad demister:
Tailored made configurations
Expedited services available
knowledge and engineering experience
High quality manufacturing standards and procedures
Manufactured in a variety of corrosion resistant materials (Metals, Plastics and Co-knit mesh options)
Welcome your inquiry any time!
Contact Person: Lily Zhou