Home ProductsDistillation Packing

200Y Metal Corrugated Perforated Plate Distillation Packing

I'm Online Chat Now

200Y Metal Corrugated Perforated Plate Distillation Packing

200Y Metal Corrugated Perforated Plate Distillation Packing
200Y Metal Corrugated Perforated Plate Distillation Packing 200Y Metal Corrugated Perforated Plate Distillation Packing

Large Image :  200Y Metal Corrugated Perforated Plate Distillation Packing

Product Details:
Place of Origin: Hengshui
Brand Name: Hualai
Certification: ISO-9001
Model Number: 200Y
Payment & Shipping Terms:
Minimum Order Quantity: 1 pc
Price: negotiation
Packaging Details: pallets, wooden box
Delivery Time: 3-5 days
Payment Terms: T/T, L/C
Supply Ability: 200 m3/week

200Y Metal Corrugated Perforated Plate Distillation Packing

Description
Material: SS304, SS316L Packing Layer Height: 100mm, 150mm, 200mm
Specific Area: 200 Size: As Per Order
Shape: Customized Plate Thickness: 0.1mm, 0.12mm, 0.15mm
High Light:

200Y Distillation Packing

,

SS316L Distillation Packing

,

200Y Packed Distillation Column

200Y Metal Corrugated Perforated Plate Distillation Structured Packing

 

 

1. 200Y metal plate structured packing has regular arrangement of components, uniform and regular gas-liquid flow channel is formed, so that gas-liquid contact in an orderly manner, so as to strengthen mass transfer, reduce amplification effect, reduce gas flow pressure drop and low liquid holding capacity.

 

2. Packed columns offer multiple benefits

 

Packed columns Trayed columns
Lower pressure drop leads to significant power savings. (Greater than 5% reduction in power is possible.) Higher pressure drop, but shorter columns.
High turndown capability. (Down to 40% of design capacity is possible.) Limited turndown for efficient operation. (60-70% of design capacity is typical.)
Enables pure argon production by distillation, therefore eliminating need for a pure hydrogen source. Can be used for high-pressure distillation.

 

3. 200Y matal plate distillation packing manufacturing Instructions:

  • The punching, rolling fine grain (or rolling grain equivalent to fine grain) and corrugation of raw stainless steel belt shall be made into corrugation belt of orifice plate.
  • The corrugation plate shall be cut into pieces according to different chord length on the cross section of packing plate.
  • The packing plate is composed of a number of corrugated plates arranged vertically and evenly.
  • The corrugation angle of the two adjacent orifice plates is overlapped in the opposite direction.
  • The purpose of block type is to facilitate the installation of packing. Each block size shall be able to enter the tower from the manhole for assembly.
  • For the block packing, the packing block close to the tower wall shall be made into the form of anti wall flow ring at the end close to the tower wall.
  • The whole disc of packing shall be tightly clamped with steel belt, and the end of the hoop shall be lapped and spot welded to prevent the packing from deformation.
  • The packing block with the same size and specification in the drawing is called "standard block", and the packing block with other sizes is called "non-standard block".
  • There are three methods to construct the packing block: nailing through, spot welding and combination of both.
  • The packing blocks shall be arranged evenly, and the disc surface shall be flat without unevenness.

 

4. 200Y metal plate structured packing Inspection and acceptance:

 

The whole packing disc assembled by mould shall be checked in batches, and the packing of each specification can be divided into batches according to the following table. When the order quantity of a certain type of structured packing is less than the batch quantity specified in the table below, the whole order can be regarded as a batch.

The sampling quantity of each batch of structured packing shall be 10% of the total number of disks, but at least not less than 2 disks.

Disk Diameter D (mm) Batch Quantity (m3)
≤800 5
>800 10

For the packing blocks used for large and medium-sized towers, the supplier shall inspect them one by one layer with the method of pre-installation, and the buyer shall send inspector to the supplier's site for acceptance.

The inspected packing shall meet all inspection items specified in the contract.

 

5. 200Y metal plate structured packing machines:

 

200Y Metal Corrugated Perforated Plate Distillation Packing 0

 

6. Distillation Packing Exporting Cases:

 

The United States of America, 500X wire gauze packing;

Vietnam, 350Y structured packing;

Kazakhstan, 250Y structured packing;

India, structured packing materials.

 

In Hualai, every year we manufacture and supply hundreds of cubic meters of metal structured packing in different models. There are many popular types and materials for option. Custom order is welcome, too! We are happy to help with what you need!

Contact Details
Anping Hualai Metal Wire Mesh Co.,Ltd

Contact Person: Amelia Li

Tel: +8615383793340

Send your inquiry directly to us (0 / 3000)