Product Details:
|
Product: | Trough Liquid Distributor | Plate Thickness: | 3 Mm, 4 Mm, 5 Mm, 6 Mm, Etc. |
---|---|---|---|
Size: | Any Size As Per Order | Position: | On Top Of Packing |
Application: | Packing Tower | Design Service: | Yes |
Type: | Gravity Type | Advantage: | Uniform Distribution |
Material: | Stainless Steel, Or As Per Order | Flow Rate: | As Per Requirement |
High Light: | tiny size Liquid Distributor,stainless steel 316l Liquid Distributor,Trough Liquid Distributor |
Trough Liquid Distributor tiny size whole shape stainless steel 316L
1. Trough liquid distributor introduction,
Liquid distributor is the most important column internal from a process point of view. It is required to distribute liquid uniformly at the top of packing tower. Meanwhile a liquid distributor must have sufficient gas passage area to avoid high pressure drop or liquid entrainment.
2. Choice of liquid distributor:
Column Diameter mm |
Specific liquid load M3/m2*h |
System fouling tendency | Turndown ratio | Suitable type of liquid distributor |
250 - 900 | 0.75 - 5 | Low - medium | <10:1 |
Trough type liquid distributor with sump Deck type liquid distributor with orifices on drip tubes |
5 - 30 | Low - medium | 2:1 |
Pan type liquid distributor Trough type liquid distributor with sump |
|
>30 | Low - medium | 2:1 |
Pan type liquid distributor Trough type liquid distributor with sump Deck type liquid distributor |
|
>900 | 0.75 - 5 | Low - medium | <10:1 |
Trough type liquid distributor with parting box Deck type liquid distributor with orifices on drip tubes |
5 - 30 | Low - medium | 2:1 |
Trough type liquid distributor with sump Trough type liquid distributor with parting box Deck type liquid distributor |
|
>30 | Low - medium | 2:1 |
Deck type liquid distributor Trough type liquid distributor with sump |
3. Liquid distributors classification:
Usually there are pressure type liquid distributors and gravity type liquid distributors.
Pressure type liquid distributor:
It provides more open area for vapor flow. Often it is less expensive, lighter, less robust and requires smaller lead up piping than gravity type liquid distributor. On the other hand, it requires high operating cost, susceptibility to plugging, corrosion and a relatively inferior quality. One example of pressure liquid distributors is pipe arm and spray type liquid distributor.
4. Trough liquid distributor characteristics:
Liquid distributor is the most important column internal from a process point of view. It is required to distribute liquid uniformly at the top of packing tower. Meanwhile a liquid distributor much have sufficient gas passage area to avoid high pressure drop or liquid entrainment.
Characteristics of an ideal liquid distributor:
Uniform liquid distribution; Resistance to fouling; Proper trundown capabitity;Low gas pressure drop; Minimum height; Higher cross-mixing capabity.
5. Trough liquid distributor production
Welcome your contact with your private tower internals plan or ideas!
Tel: 15112670997