|
Product Details:
|
| Product Name: | PP Mesh Pad Mist Eliminator | Material: | PP Mesh, Double Wire Knitting |
|---|---|---|---|
| Shape: | As Per Order | Thickness: | 100mm, Or As Per Order |
| Sections: | 2, 3, Or As Per Order | Feature: | Anti Corrosion |
| High Light: | wire mesh demister pad,wire mesh pad |
||
PP Mesh Pad Double Wire Knitting Mesh 100mm Thickness Cellular Structure
PP mesh pad mist eliminator, double wire knitting mesh better efficiency
PP Mesh pad mist eliminator, which is used in removing droplets entrained in flow gas, is constructed from knitted wire mesh with a cellular structure. The knit mesh are made into a mesh pad with determinate thickness and size, through which the two phases liquid-gas or liquid-vapor are disengaged.
From the statistic data obtained both in laboratory tests and industrial applications, it shows that the proper designed mesh pad demister allows a separation of liquids carried by gas with efficiency reaching 99.9%.
Demister Inquiry Table if Calculation Suggestions and Service are needed.
| Please State your demister / mist eliminator application | |||||
| Operating data | |||||
| Gas | Max. gas volume flow (operating conditions) | M3/h | |||
| Gas density (operating condistions) | Kg/m3 | ||||
| Operating pressure | Bar (a) | ||||
| Operating temperature | ℃ | ||||
| Liquid | Liquid content | Kg/h | |||
| Liquid density | Kg/m3 | ||||
| Dynamic viscosity of the liquid | mPas | ||||
| Geometrical data | |||||
| Flow direction | Horizontal | ¨ | |||
| Vertical | ¨ | ||||
| Installed in | Column | ¨ | |||
| Pipe | ¨ | ||||
| Column diameter or dimensions | mm | ||||
| Opening for installation | Manhole | ¨ DN | |||
| Vessel flange | ¨ Size | ||||
| Requirements | |||||
| type of mist eliminator | Wire mesh demister | ||||
| Material | |||||
| Efficiency of separation | % | ||||
| Max. pressure drop | |||||
| Miscellaneous | |||||
Please pay attention to the Unit when refering to this sheet.
Where are DEMISTER units used?
Knockout drums and separators – save on capital costs by decreasing vessel size-recover costly fatty acids from stream-reduce compressor maintenance by preventing scale build-up
Absorbers – reduce overhead losses of glycols in dehydrators to no more than 0.1 gal/MMSCF natural gas-cut losses of absorption oil and amines in CO2 systems
Scrubbers – reduce chemical discharges from Kraft mill smelt dissolver tank to less than 0.11 kg/dry ton (0.25 lb/dry ton) of pulp-improve scrubber efficiency by removing particulates carried in entrained liquids
Distillation columns – improve product purities and increase throughput capacities for petrochemicals, organic intermediates, fine chemicals
Evaporators – prevent carryover loss of valuable products, keep condensate TDS <10 ppm for highest quality boiler feed water-clean up vacuum ejector stream discharge-lower maintenance in vapor re-compression systems
High pressure steam systems – provide dry steam- cut TDS to <10 ppb in condensate-eliminate build-up on turbine blades
Refinery towers – increase throughput capacity-take deeper cuts for greater product yields – prolong catalyst life in downstream cracking and reforming units by reducing carbon and metals in side
draws-use lower grade crudes.
PP mist eliminator Advantage:
Low cost
Practical solution
Low pressure drop
Simplified maintenance
Problem solving results
Tailored to meet client specifications
Guaranteed high performance efficiency
Material of construction
Located in Anping, China, we enjoy many advantages like convenient material purchasing, lower labor cost, faster courier service, etc. Mist Eliminator Material we usually use: PP, PTFE, SS304, SS304L, SS316, SS316L, SS201, SS202, SS310S, SS321, Copper, Nickel, Titanium, Duplex 2205, Duplex 2507, NS-80, Monel 400 alloy, Co-knit 904L+fiber glass, Co-knit 316L+ fiber glass, Co-knit 316L+PP flat...
Package & shipping of wire mesh demister:
Welcome your inquiry with any questions! Here in Hualai we are always ready to be helpful!
Contact Person: AnnLi
Tel: +8613333087316
