|
Product Details:
|
| Product Name: | Lab Wire Mesh Mist Eliminator | Material: | SS304 |
|---|---|---|---|
| Thickness: | 30mm, Or As Per Order | Technique: | Layers Of Knitted Mesh |
| Sample: | Available | Feature: | Corrosion Resistance |
| High Light: | oil mist eliminator,wire mesh pad |
||
Laboratory Mist Eliminator Stainless Steel φ 115mm Demister ISO9001-2015
What can Hualai factory do for you in the mesh pad demister?
1. Hualai demister is tailor made to suit for specific vessel dimensions and configuration.
2. Hualai provides wide variety of material to suit for even the most corrosive process environments.
3. Hualai factory can supplies either mesh pad only, or complete demister with top and bottom supporting grids for direct installation in vessels.
4. Sectional construction for easy handling and access through man ways.
5. Complete accessory pack including support ring and beam can be provided when required.
Wire mesh mist eliminator typical applications:
Absorber,
Scrubbers,
Evaporator,
Steam drums,
Knockout drums,
Separators vessels,
Refining lube towers,
Refining vacuum tower,
and any process vessels handling liquid and vapor where complete separation of entrained liquid droplets is desired from gas/vapor phase.
Hualai’s Advantages in mesh pad demister:
Optimized solutions
Standard configurations
Tailored made configurations
Expedited services available
knowledge and engineering experience
High quality manufacturing standards and procedures
Manufactured in a variety of corrosion resistant materials (Metals, Plastics and Co-knit mesh options)
Mist eliminators or Demister pads are porous blankets of metal or plastic knitted wire mesh, designed and constructed for the efficient, economical removal of entrained liquid droplets from vapor streams. Demister Pads can be fabricated in any required size and shape and may be installed in new or existing process vessels.
HOW IT WORKS
When vapor and entrained liquid droplets pass through a mist eliminator, the vapor moves freely through the mesh pad but the liquid droplets, due to their greater inertia, cannot make the necessary sharp turns and as a result are thrown into contact with the wire surfaces and briefly held there. As more droplets enter the pad and collect on the wires, they grow in size, run down the wire to the bottom surface of the mesh separator and fall from the unit. Overhead vapor is now free of entrained liquid.
Demister Inquiry Table if Calculation Suggestions and Service are needed
| Please State your demister / mist eliminator application | |||||
| Operating data | |||||
| Gas | Max. gas volume flow (operating conditions) | M3/h | |||
| Gas density (operating condistions) | Kg/m3 | ||||
| Operating pressure | Bar (a) | ||||
| Operating temperature | ℃ | ||||
| Liquid | Liquid content | Kg/h | |||
| Liquid density | Kg/m3 | ||||
| Dynamic viscosity of the liquid | mPas | ||||
| Geometrical data | |||||
| Flow direction | Horizontal | ¨ | |||
| Vertical | ¨ | ||||
| Installed in | Column | ¨ | |||
| Pipe | ¨ | ||||
| Column diameter or dimensions | mm | ||||
| Opening for installation | Manhole | ¨ DN | |||
| Vessel flange | ¨ Size | ||||
| Requirements | |||||
| type of mist eliminator | Wire mesh demister | ||||
| Material | |||||
| Efficiency of separation | % | ||||
| Max. pressure drop | |||||
| Miscellaneous | |||||
Please pay attention to the Unit when refering to this sheet.
Welcome your inquiry with any questions! Here in Hualai we are always ready to be helpful!
Contact Person: AnnLi
Tel: +8613333087316
