|
Product Details:
|
| Size: | Diameter 1800mm | Material: | SS304 |
|---|---|---|---|
| Use: | Rectifying Tower | Product Name: | Demister Mist Eliminator |
| Feature: | Collect Fine Droplet | Section: | 7 Pcs Or As Per Order |
| High Light: | mesh pad mist eliminator,wire mesh pad |
||
300mm Mesh Pad Demister Mist Eliminator For 1 - 3 Um Find Droplet
The demister mist eliminator is designed to collect liquid particles contained in the vapour phase after boiling, vacuum evaporation or bubbling process.
Small droplets in the gas contact the wide surface of the filaments of the mesh pad demister, gradually grow into large liquid droplets and flow and drop by a special structure accelerating the coalescing of the liquid droplets. The mesh pad of the demister is highly porous, so the vapour gas passes through the demister without hindrance, leaving only pure gas.
The process is not a type of filtering as the hole size of the knit mesh is not specially related to the size of the liquid droplets. This mist elimination is caused by the collision and sudden change resulting from the flowing speed of the small liquid droplets, and the coalescing of the liquid drips and gravity cause their descent.
Demister mist eliminator Specifications in this case
| Item | Value | Unit |
| Material | SS304 | / |
| Shape & Size | Φ1800 | mm |
| Mesh Thickness | 300 | mm |
| Demsiter Height | 350 | mm |
| Wire Diameter | 0.23 | mm |
| Mesh Density | 216 | kg/m3 |
| Void Fraction | 0.973 | / |
| Specific Area | 474 | m2/m3 |
| Grids | 25*3 flat bar | mm |
It is appropriate for collecting very fine particles (1-3 micron) and effective for evaporator, washing equipment, compressor and absorption column, etc. Normally, 200mm to 300mm thickness mesh pad is used.
More types of demister mist eliminators and applications:
|
Mesh Density |
Eq to: YORK | Description |
| 80 | 931 | For a given load of mist, the highest flow velocity is achieved of all styles. Ideal where it is required to minimize the pressure loss, possible clogging is concerned, the size of particle to be collected is relatively large, and/or a very high efficiency is not required. |
| 144 | 431 | Used for general purposes. An efficiency of 98 to 99% is achieved at a velocity of 1 to 5 m/sec. |
| 192 | 421 | Used where an especially high efficiency is required. While a pressure loss is slightly higher, it achieves an efficiency of 99 to 100% with particle sizes 3μ or more at a velocity of 1 to 6 m/sec., and is ideal where an efficiency of 90% or more is required at a velocity of 1 m/sec. or less. |
| 216 | Used for collecting fine particles of 1 to 3μ in size. Especially for a low-density mist of 1.0 g or less, it is used in a thickness of 200 to 300 mm. |
|
| 432 | 333 | Used for collecting fine particles. An efficiency higher than that of 216 can be achieved. The most remarkable characteristic is that it provides a high efficiency with a reduced thickness. |
Advantages of demister mist eliminator:
Prevention of air pollution
Reduce of costly liquid lose
Reduce of product contamination
Improvement in process efficiency
Minimizing product losses in re-boilers & evaporators
Preventing carbon & metal entrainment in down stream catalyst cracker.
What can Hualai factory do for you in the mesh pad demister?
1. Hualai demister is tailor made to suit for specific vessel dimensions and configuration.
2. Hualai provides wide variety of material to suit for even the most corrosive process environments.
3. Hualai factory can supplies either mesh pad only, or complete demister with top and bottom supporting grids for direct installation in vessels.
4. Sectional construction for easy handling and access through man ways.
5. Complete accessory pack including support ring and beam can be provided when required.
Package & shipping of demister mist eliminator:
Welcome your inquiry with any questions! Here in Hualai we are always ready to be helpful!
Contact Person: Lily Jia
Tel: +8618832889273
